The curing trolley (see the picture) is special vehicle for
shipping during the production. It is used to load the billet after
cutting to the autoclave for curing, and then move to finished
goods site, and it will load the billet to autoclave after being
The curing trolley is composed of 2 main parts, frame and the
The frame is made of steel panel with good steel and easy
The wheel is composed of vehicle, shaft and bearing, the rolling is
very flexible and stable.
It has good decoupling shaft.
The bottom of the trolley is loaded billets cutting by the 2 mould.
Attention: It should add washer to make sure it is flat between the
frame and the floor surface, to avoid the frame to lean.
The trolley runs stably on the guide and the trolley is connected
by the hook, the trolley then goes to the autoclave to cure the
billet and move the billets to the finished goods site, and then
the decouple will unload the hook.
Assembly the wheel with reel, shaft, bearing, bearing sleeve and
press end, the bearing is filled with colloidal graphite, and the
clearance inside the wheel flange is 800+0.0 mm.
The wheel is installed on the lower part of the frame, the surface
in the same plane on four wheels.
Sankon designs and manufactures AAC block making plant, to meet the
specific requirements of the market and cutstomers. As a new
building material, AAC block fulfills the demand of concrete
industry, which requires to save the natural resources and protect
AAC is becoming more and more popular around the world, from
western countries and then to developing countries. Below
Properties make AAC have unmatchable property, especially for high
1) Extreme Light Weight
2) Large Variety of Sizes
3) High Fire Resistant
4) Excellent Thermal Insulation
5) Great Sound Insulation
6) Moisture Protection
7) Termite Resistant
8) High Workability and Easy Processing
AAC is produced out of a mix of cement, lime, fly ash, gangue,
river sand and aluminium powder ect., through batching, mixing,
casting, cuttimg and autoclaving. AAC has the advantages of
extremely light weight, high compressive strength, excellent
thermal insulation, great scousitc insulation and high fire
resistance. AAC can be produced in a large variety of sizes, from
stand blocks to large reinforced panels, and it can be cut, sawn,
drilled, nailed and milled like wood, making it an extremely
workable product, AAC is environment-friendly and new building
Control System: Germany, Siemens PLC, main electrical components
are from Germany Siemens, it
Weighing system are controlled by precise weighing system,
guarantee the weighing accuracy. The accuracy will effect the
qualified product rate, higher accuracy, higher qualified produce
Steel silo storage, automatically control with arch breaker, level
With quality and service: A-Z Integrated solution for AAC brick
making plant, the highly sophisticated manufacturing process.